Skip to main content
Structural Engineering

Structural Engineering For School Buildings And Extensions

George KhalilFounder & Principal Engineer5 min read

Structural engineering on a school covers the same footings, slabs and frames as any building, with one extra condition: the school keeps operating while the work goes on. A new hall, a slab extension, a ramp or a lift goes in beside classrooms in use, so the design has to suit the existing buildings it joins and a site full of students.

Our school work in NSW includes performing arts and indoor sports buildings at Chifley College in Mount Druitt and at Karabar High School, a slab extension and a new concrete lift at Girraween High School, and a slab, ramp and lift at Picnic Point High School. We have also designed steel-framed roofs over concrete slabs at Northmead High School and Mount Druitt Public School.

The building class

Under the National Construction Code, a school building is Class 9b, the class for assembly buildings. Floor loads come from AS/NZS 1170.1 for the way each space is used, and a hall where people crowd together is designed for a higher load than a classroom.

Halls and indoor sports buildings

A performing arts and sports building needs a big floor with no columns in the way, so the roof spans the full width in steel. Our designs at Chifley College and Karabar High School were steel-framed, with the steelwork designed and specified to AS 4100, and both scopes included value engineering and a risk assessment.

A long-span roof is light for its size. Wind trying to lift it off often governs the design more than its own weight does, so the bracing, the connections and the holding-down bolts are sized for uplift under AS 1170.2. Deflection matters too, because a long roof beam that sags takes height away from the court underneath. The frame types are the same family described in [steel portal frames for warehouses](/blog/steel-portal-frames-for-warehouses).

Slab extensions

An extension pours new concrete against an old slab that finished shrinking years ago. The new slab is either tied to the old one with bars drilled and epoxied into its edge, or separated from it by a joint that lets each move on its own.

The choice depends on whether the two will settle together. An extension on different footings, or on different ground, from the original building tends to settle differently, and a planned joint is far cheaper than a crack across a classroom floor.

Ramps

Accessible ramps are designed to AS 1428.1, which sets the gradient, the landings and the handrails. The structure is a sloping slab with level landings, sitting on fill or on its own footings, and the junction with the existing building is where it wants to move. At Blacktown West Public School, our scope was the extension of an existing concrete ramp.

Lifts in existing school buildings

A new lift gives step-free access to every level, and in an existing building it means a pit dug beside old footings and openings cut through slabs that were designed as continuous. The wider issues are in [adding a lift to an existing building](/blog/adding-a-lift-to-an-existing-building).

Old buildings and missing drawings

School buildings can be decades old, and the original drawings aren't always on file. Before an extension ties into one, we confirm what is actually there, including the slab thickness, the reinforcement, the footings and the condition of any steel. At Bonnyrigg Heights Public School our scope was the rectification of existing steelwork. The method is set out in [assessing an existing building with no drawings](/blog/assessing-an-existing-building-with-no-drawings).

A site that stays open

Construction on a school happens with students and staff close by, and the structural design can help. Temporary propping is kept out of the areas the school still uses, and steel frames that arrive fabricated and bolt together on site keep the noisiest stages short. On most of our school projects, the construction supervision and the pre-pour inspections were part of our scope.

How we approach it

We design school work around the school as much as the structure: the clear spans a hall needs, the movement between old concrete and new, and a sequence that keeps students away from the work.

In a school, the best structure is the one the students never have a reason to notice.

ACSES provides structural engineering for school buildings and extensions across NSW. Talk to us about a project.

Building Relationships Beyond Structures

George Khalil

George Khalil

Founder & Principal Engineer

almost three decades of structural, civil, and geotechnical engineering experience across 1,000+ projects.

SchoolsExtensionsSteel RoofsRampsNCC Class 9b

Tell us about your project.

We will respond with a clear understanding of how we can assist.

Partner With Us